- home
________________
- d1-switch
- network optimization
- streamer digital out
- CD transport
- reclockers
- d1-core DAC
- d1-unity DAC
- d1-biunity DAC
- d1-triunity DAC
- d1-sublime DAC
- d1-total streamer/DAC
- active crossovers
- live-clocking option
- live-power option
- bass boost option
- driver sublime
- amplifier sublime
- power regenerator
- Balloon speakers
- column speakers
- cables
________________
- how to use
- where to listen
- prices
Network optimization by Totaldac
Totaldac worked a lot on the network optimization to get the best sound from a streamer and Totaldac can now supply the same network.
DJM ACTIV 10G ethernet EMI filter
The DJM ACTIV 10G ethernet EMI filter cleans and provides a galvanic isolation to the ethernet signal at the input of your system, from example between the RJ45 wall plug and the hifi system.So this filter has one RJ45 input and one RJ45 output.
EAhibrid PureDC-B1
The DJM ACTIV 10G EMI sounds much better when used with a battery power supply.Totaldac has selected the EAhibrid PureDC-B1 as smart battery power supply to feed the ethernet filter with a clean 12V which can be 100% isolated from the mains network during more than 8 hours.
The battery charging is safe and easy.
Totaldac ethernet switch d1-switch
The Totaldac d1-switch follows the battery powered ethernet EMI filter to improve the ethernet timing (so improve the sound quality again) and multiply the number of RJ45 outputs.
Totaldac ethernet cable/filter
This is a RJ45 cable which also filters the unwanted high frequencies. Its length is 2m or more because the filtering part takes most of the 2m length.The filtering of high frequency pollutions improves the soundstage and makes the sound more natural.
You can use this cable/filter to interconnect the whole audio network between the wall plug and the streamer.
mobile phone: +33 6 18 03 14 08 (European time zone, Whatsapp compatible)